Enhance your Ness security system with the reliable and efficient Ness Radio Interface (Part No. 100-200). This optional serial radio receiver is designed to enable seamless radio functionality for the Ness D8/D16 series, including D8x/D16x and D8XCEL/D16XCEL control panels. Its precise engineering ensures compatibility with all Ness one-way radio transmitters, providing robust performance for alarm communication and remote control functionality.

Product Description

The Ness Radio Interface is a compact, high-performance radio receiver panel interface purpose-built to integrate with Ness control panels via a simple 4-wire serial connection. With support for 304MHz frequency, it ensures secure and stable wireless communication with compatible devices.

Installed externally to avoid electronic interference, this receiver ensures optimal radio reception and system reliability. When signal strength is marginal, it offers flexible installation options—allowing for remote mounting up to 50 meters from the panel using shielded cabling, and optional external antenna support.

What’s Included in the Box

• 1 × Ness Radio Interface (Part No. 100-200)

• 1 × 4-wire loom and plug for panel connection

• Installation guide (refer to D8/D16 Installation Manual)

• Pre-attached antenna wire

Main Features

• Enables radio functionality for Ness D8x/D16x and XCEL series panels

• Compatible with all Ness one-way radio transmitters

• Secure and reliable 304MHz radio communication

• Simplified installation with plug-and-play 4-wire connection

• Optional external antenna support (Part No. 100-046)

• Can be mounted remotely (up to 50m) for improved reception

• Compact, durable design: 78mm (H) × 73mm (W) × 27mm (D)

Detailed Specifications

• Part Number: 100-200

• Dimensions: 78mm (H) × 73mm (W) × 27mm (D)

• Operating Voltage: 12V DC (supplied from panel via 4-wire connection)

• Outputs: Serial connection to Ness control panel (cable and plug included)

• Radio Frequency: 304MHz

• Panel Compatibility: Ness D8x/D16x, D8XCEL/D16XCEL

• Transmitter Compatibility: All Ness one-way radio transmitters

• Programming: Not applicable – configuration is done via control panel

Warranty Information

Covered under Ness Corporation’s standard warranty. 

About Ness Corporation

Ness Corporation is a leading Australian designer and manufacturer of high-quality electronic security products. With decades of innovation in the security and automation sector, Ness products are renowned for reliability, user-friendly design, and seamless integration into residential and commercial systems.

SKU

100-200

Practical Use Scenarios

• Residential Alarm Systems: Easily add remote control and wireless detection functionality to existing D8/D16 panels.

• Commercial Premises: Improve alarm communication in large sites by installing the receiver remotely with shielded cabling.

• Installations in Metal Enclosures: Maintain signal performance by protruding the antenna or using the external antenna accessory.

Datasheets and Resources

• Datasheet

Excellence for the Australian and New Zealand Market

The Ness Radio Interface (100-200) is engineered to meet the specific requirements of the Australian and New Zealand markets. It is:

• Fully optimized for local RF standards (304MHz)

• Compliant with relevant Australian quality and electrical safety standards

• Sourced exclusively through authorized Australian distributor networks

• Backed by local support and warranty from Ness Corporation

• NDSS and local security industry approvals where applicable

Trust Ness for durable, standards-compliant solutions that integrate flawlessly into your security infrastructure.

FAQs – Ness Radio Interface (Part No. 100-200)

Q1: Can the Ness Radio Interface (100-200) be installed inside the control panel?
A1: It is recommended to install the Ness Radio Interface outside the control panel to prevent interference from the panel’s electronics. If necessary, ensure the antenna wire protrudes outside the metal enclosure.

Q2: What type of cable should be used to install the interface remotely (Part No. 100-200)?
A2: For remote installation up to 50 meters, use a 14/0.20 SHIELDED cable or equivalent. Do not connect the shield at the receiver end.

Q3: Is programming required for the Ness Radio Interface (100-200)?
A3: No programming is needed. All configuration is handled through the compatible Ness control panel.

Q4: Which antennas are compatible with the Ness Radio Interface (Part No. 100-200)?
A4: The interface includes a built-in antenna wire but supports the optional External Antenna (Part No. 100-046) for installations in areas with marginal radio signal.

Q5: What transmitters can be used with the Ness Radio Interface (100-200)?
A5: It is compatible with all Ness one-way radio transmitters, ensuring wide-ranging support across Ness wireless devices