Security Alarm Communicator Interface Cable | Port 0 Connection | Alarm Reporting & Remote Upload/Download
The Inner Range Integriti / Concept 4000 Port Zero to Multipath T4000 Interface Cable IR-996795 is a purpose-designed 1.2-metre security alarm communication cable for connecting compatible Inner Range Integriti and Concept 4000 control panels to a Multipath T4000 security communicator. Featuring a dedicated 5-pin Port Zero connector, 3-pin T4000 interface connector and separate power connection leads, this professional alarm interface cable supports alarm communications and remote upload/download functionality in compatible electronic security installations across Australia and New Zealand.
Manufactured for Inner Range security equipment, the IR-996795 provides a direct physical connection between a supported security controller's Port Zero communication interface and the compatible Multipath T4000 communicator.
The cable helps installers integrate existing Integriti and Concept 4000 systems with supported Multipath-IP alarm reporting infrastructure. In a correctly configured installation, this arrangement supports transmission of security alarm events and the relevant remote programming or diagnostic communication functions.
At approximately 1200 mm long, the cable is suited to installation within a security equipment cabinet or between closely located controller and communicator equipment.
Its dedicated connectors simplify installation by reducing the need to fabricate custom communication wiring. The included red and black flying leads also provide connection points for the T4000's power arrangements, subject to the manufacturer's wiring instructions.
The IR-996795 is a passive interface cable, not a standalone alarm transmitter, network device or power supply. All alarm reporting and remote communication functionality depends on the connected controllers, T4000 equipment and properly configured monitoring service.
Brand New and In Stock
+2
Main Features
-
Purpose-Built Port Zero Interface: Connects compatible Integriti or Concept 4000 controllers to a Multipath T4000 communicator.
-
1.2-Metre Cable Length: Convenient for equipment-cabinet and closely located device installations.
-
5-Pin Controller Connector: Designed for the supported Inner Range Port Zero interface.
-
3-Pin T4000 Connector: Provides the communication connection to the compatible Multipath T4000 unit.
-
Separate Power Flying Leads: Red and black leads for the specified communicator power connection arrangement.
-
Alarm Communication Support: Enables the supported serial communication link used for alarm reporting.
-
Upload/Download Communication Support: Facilitates compatible remote system communication functions through the connected T4000 infrastructure.
-
Integriti Compatibility: Designed for supported Inner Range Integriti controller installations.
-
Concept 4000 Compatibility: Suitable for compatible Concept 4000 controllers with the correct Port Zero interface and firmware.
-
Dedicated Connection Design: Reduces reliance on improvised wiring and custom connector assemblies.
-
Suitable for Retrofit Projects: Useful when adding or replacing a T4000 communicator in an existing security system.
-
Professional Security Application: Designed for use by electronic security technicians and installers.
Technical Specifications
|
Specification
|
Details
|
|
Brand
|
Inner Range
|
|
Product name
|
Integriti / Concept 4000 Port Zero to Multipath T4000 Interface Cable
|
|
Manufacturer product name
|
T4000 Integriti Port Zero Connection Lead
|
|
SKU
|
IR-996795
|
|
Manufacturer part number
|
996795
|
|
Product category
|
Security system communication interface cable
|
|
Cable length
|
1200 mm (1.2 m)
|
|
Controller connection
|
5-pin Port Zero connector
|
|
Communicator connection
|
3-pin T4000 interface connector
|
|
Additional connections
|
Red and black power flying leads
|
|
Controller communication interface
|
Port Zero serial interface
|
|
Supported communication role
|
Alarm communications and upload/download data
|
|
Compatible controller family
|
Inner Range Integriti
|
|
Legacy controller compatibility
|
Inner Range Concept 4000, subject to firmware and interface support
|
|
Compatible communicator
|
Supported Multipath T4000 models
|
|
Connection type
|
Wired
|
|
Communication medium
|
Electrical conductors
|
|
External power supply
|
Not included
|
|
Built-in electronics
|
No standalone converter or communicator electronics specified
|
|
Typical mounting environment
|
Protected security equipment cabinet
|
|
Primary application
|
Controller-to-alarm-communicator connection
|
Manufacturer and Australian distributor references confirm product code 996795 and its intended Port Zero connection. Cable length and connector specifications are published by Australian resellers.
Multipath IP| Inner Range
+2
What's Included in the Box
- 1 × Inner Range Integriti / Concept 4000 Port Zero to Multipath T4000 Interface Cable – IR-996795, approximately 1.2 metres long, with fitted communication connectors and power connection leads.
The Integriti or Concept 4000 controller, Multipath T4000 communicator, external power supply, batteries and other installation accessories are not included.
Connection and Operation
The IR-996795 links the controller's Port Zero interface with the supported T4000 communicator.
Typical system connection
Integriti / Concept 4000 Controller
Port Zero – 5-pin connection
IR-996795 Interface Cable
1.2 m communication lead + power leads
Multipath T4000 Communicator
3-pin serial communication connection
Illustrative connectivity diagram only. Power wiring and terminal positions must follow the applicable manufacturer installation manual.
When correctly installed and configured, the connection enables supported T4000 alarm reporting and system upload/download communications.
Communication settings, such as the controller's GSM communications task and serial parameters, must be configured according to the controller firmware and the T4000 installation manual.
Practical Use Scenarios
Existing Concept 4000 alarm upgrades
Connect compatible legacy Concept 4000 controllers to supported Multipath T4000 communication equipment without replacing the entire control panel solely to establish the supported serial interface.
Integriti alarm communicator installation
Provide the required physical connection between an Integriti controller and T4000 communicator for configured alarm transmission and remote communication functions.
Commercial building security
Support monitored security installations in offices, retail buildings and professional facilities using compatible Inner Range control panels.
Industrial and warehouse premises
Integrate a Multipath T4000 communicator with existing security controllers used to monitor restricted areas, storage facilities and industrial buildings.
Security equipment servicing
Replace a missing, damaged or unsuitable Port Zero interface cable during maintenance or communicator replacement.
Remote maintenance infrastructure
Support compatible controller upload/download communication through a properly configured T4000 installation and available communication service.
Compatibility and Installation Requirements
The Inner Range IR-996795 is intended for compatible Integriti and Concept 4000 security controllers with a supported Port Zero interface.
The T4000 documentation identifies the following communication requirements for relevant configurations:
-
Integriti: Port Zero communication supported with compatible controller firmware and configuration.
-
Concept 4000: Port Zero communication supported with appropriate Type 2 settings and compatible firmware.
-
T4000: Requires a supported communicator model with the correct serial interface connection.
-
Communication settings: Relevant installations use a GSM communications task, with serial parameters documented as 1200 baud, 8 data bits, no parity and 1 stop bit.
The precise settings must be checked against the controller firmware and current manufacturer instructions.
Important: IR-996795 is the Port Zero connection lead. The separate IR-996796 is the UART interface cable. These products should not be treated as interchangeable without checking the intended connection.
Installation should be undertaken by a qualified electronic security technician familiar with the controller, communicator and power supply requirements.
Warranty Information
The Inner Range IR-996795 interface cable is subject to applicable manufacturer warranty conditions and Australian and New Zealand consumer protection laws.
The exact manufacturer warranty period has not been independently verified.
Warranty claims and technical enquiries can be directed through the supplying distributor and, where applicable, escalated to Inner Range for manufacturer assessment.
About Inner Range
Inner Range is an Australian security technology manufacturer specialising in integrated security management, electronic access control, intruder detection and professional alarm communication solutions.
Its product portfolio includes Integriti, Inception and Multipath-IP security equipment, along with accessories designed to support installation, integration and long-term maintenance.
SKU and Product Identification
|
Field
|
Details
|
|
SKU
|
IR-996795
|
|
Manufacturer part number
|
996795
|
|
Brand
|
Inner Range
|
|
Product
|
Port Zero to Multipath T4000 Interface Cable
|
|
Manufacturer designation
|
T4000 Integriti Port Zero Connection Lead
|
|
Cable length
|
1.2 m
|
|
Product type
|
Security alarm communication cable
|
Datasheets and Downloadable Resources
For installation work, use the documentation matching the actual controller and communicator firmware revisions.
Excellence for the Australian and New Zealand Market
The Inner Range Integriti / Concept 4000 Port Zero to Multipath T4000 Interface Cable IR-996795 is a practical accessory for professional security alarm communication installations throughout Australia and New Zealand.
Australian security system compatibility: Designed for supported Inner Range Integriti and Concept 4000 controllers commonly used in professional security installations.
Reliable system integration: Provides a dedicated manufacturer-specified physical interface between compatible alarm controllers and Multipath T4000 communicators.
Installation quality and compliance: The cable should be installed in accordance with the manufacturer's instructions and applicable Australian or New Zealand installation requirements. Product-specific certification claims have not been independently established.
Authorised sourcing: Genuine Inner Range equipment should be sourced through authorised brand representatives or recognised security distributors. The authorisation status of an individual seller should be confirmed before purchase.
Manufacturer warranty coordination: Warranty assessment and technical support may be arranged with Inner Range through the appropriate authorised supply channel, subject to applicable terms.
Suitable for local security projects: Useful for commercial, industrial, institutional and other managed security installations requiring compatible Multipath T4000 communications.
FAQs
1. What is the Inner Range Integriti / Concept 4000 Port Zero Interface Cable IR-996795 used for?
The IR-996795 connects a compatible Inner Range Integriti or Concept 4000 controller to a Multipath T4000 security communicator, supporting configured alarm reporting and remote communication functions.
2. What is the cable length of the Inner Range IR-996795?
The IR-996795 has a published cable length of approximately 1200 mm, or 1.2 metres.
3. Is the Inner Range IR-996795 compatible with Integriti controllers?
Yes. The IR-996795 is designed for supported Inner Range Integriti controllers equipped with the appropriate Port Zero interface.
4. Can the IR-996795 be used with an Inner Range Concept 4000 alarm panel?
Yes. The IR-996795 supports compatible Concept 4000 controllers, subject to the correct Port Zero configuration and controller firmware.
5. Does the Inner Range IR-996795 connect directly to a Multipath T4000 communicator?
Yes. The IR-996795 provides the specified physical communication connection between the supported controller's Port Zero interface and the compatible T4000 communicator.
6. What connectors are fitted to the Inner Range IR-996795 cable?
The IR-996795 is described as having a 5-pin connector for the controller Port Zero interface and a 3-pin connector for the T4000 communicator, together with separate red and black power flying leads.
7. Does the Inner Range IR-996795 support alarm reporting?
Yes. The IR-996795 supports the physical communications link used by compatible Integriti and Concept 4000 systems to transmit alarm reporting data through an appropriately configured T4000 communicator.
8. Can the IR-996795 support remote upload and download communications?
Yes. The IR-996795 supports compatible upload/download communication functions when used with properly configured controller, communicator and monitoring infrastructure.
9. Does the Inner Range IR-996795 provide network or mobile connectivity by itself?
No. The IR-996795 is a passive connection cable. Network and mobile communication capabilities are provided by the connected Multipath T4000 system and its configured services.
10. Is the Inner Range IR-996795 compatible with a T4000 Lite communicator?
Australian product documentation lists the T4000 Lite as an associated product. Compatibility with a particular T4000 Lite revision and its available communication functionality should be confirmed before installation.
11. What is the difference between Inner Range IR-996795 and IR-996796?
The IR-996795 is the Port Zero interface cable, whereas the IR-996796 is an Integriti/Concept UART interface cable. They are intended for different communication connection arrangements.
12. Does the Inner Range IR-996795 include a Multipath T4000 communicator?
No. The IR-996795 is a connection cable only. The T4000 communicator must be obtained separately.
13. Can the Inner Range IR-996795 be used for an existing security system upgrade?
Yes. The IR-996795 can be used as part of a compatible Integriti or Concept 4000 alarm communication upgrade, including supported Multipath T4000 installations.
14. Does the Inner Range IR-996795 require programming?
The cable itself does not require programming. However, the connected controller and T4000 communicator require the appropriate communication settings and system configuration.
15. Can the Inner Range IR-996795 be used instead of a standard USB cable?
No. The IR-996795 is a dedicated Port Zero security communication cable and is not a standard USB connection lead.
16. Does the Inner Range IR-996795 supply power to the T4000 communicator?
The IR-996795 includes red and black flying leads for the specified T4000 power connection arrangement. The cable does not generate power and requires an appropriately rated external power source.
17. Is the Inner Range IR-996795 suitable for Australian and New Zealand security systems?
Yes. The IR-996795 is intended for compatible Inner Range security installations in Australia and New Zealand, subject to system and communicator compatibility.
18. Where can I find installation information for the Inner Range IR-996795?
Installation and communication configuration information for the IR-996795 is available through Inner Range's official product resources and the relevant Multipath T4000 installation documentation.
