The Paradox SP65 Insite Gold IP Alarm Kit with TM50 Touchscreen (PK-GOLD-4) is an expandable intrusion security system designed for residential and commercial properties across Australia and New Zealand. Featuring the Paradox SP65 32-zone alarm controller, IP150+ Ethernet internet communication module, TM50 5-inch colour touchscreen keypad, two NV5 digital pet-resistant PIR motion detectors, X2 mini siren/strobe and 12V top-hat screamer, this kit combines intelligent motion detection, touchscreen security control and compatible remote alarm management.
At the centre of the system is the Paradox SP65 Alarm Controller, providing nine onboard hardwired security zones and expansion capabilities supporting up to 32 zones. The controller accommodates 32 users, two independent alarm partitions and programmable outputs expandable to 16, allowing security professionals to configure protection for houses, offices, retail shops and smaller commercial premises.
The included Paradox TM50W 5-Inch Colour Touchscreen Keypad provides a modern interface for operating and monitoring the security system. Its colour display features intuitive icon-based menus, customisable labels and support for SpotOn Alarm Locator and OneScreen Monitoring, helping users view configured alarm information and manage security functions through a central touchscreen.
For indoor intrusion detection, the kit includes two Paradox NV5 Digital PIR Motion Detectors, incorporating Full Authority Digital Electronics Control (FADEC), advanced 3D Lodiff Fresnel lens technology and pet resistance for animals weighing up to 16kg. Each detector provides a 10m × 10m detection pattern with a 90-degree viewing angle and configurable digital sensitivity settings.
Internet communication is provided by the included Paradox IP150+ Internet Module, which connects the SP65 controller to a compatible Ethernet network. Depending on the module firmware and system configuration, it supports remote security management, IP alarm reporting and authorised remote BabyWare programming.
The kit is marketed as an Insite Gold IP Alarm Kit because Paradox's IP150+ V5 documentation supports the Insite Gold application. However, newer MQTT-based IP150+ firmware supports BlueEye instead of Insite Gold. The actual application must be confirmed against the supplied module firmware before commissioning.
The supplied X2 Combination Mini Siren and Strobe provides audible and visual alarm notification. A separate CSD-1003 12V DC Top-Hat Screamer provides an additional audible warning device.
Completing the package is the Paradox Base Kit (PDX-KIT), containing a metal alarm enclosure, backup battery, plug-pack power supply and cabinet tamper components. A Paradox MG and SP user manual is also included.
With its expandable SP65 controller, premium touchscreen keypad, advanced NV5 digital intrusion detection and included IP communication module, the Paradox SP65 Insite Gold IP Kit PK-GOLD-4 offers a versatile security solution for professionally installed residential and commercial alarm systems.
Important: The included NV5 detectors, TM50 keypad, X2 siren/strobe and top-hat screamer are wired devices. Wireless security expansion requires compatible additional equipment.
IP connectivity: The kit includes an IP150+ Ethernet communication module, but not a cellular communicator. An Ethernet connection, suitable internet service, compatible firmware and any applicable remote-access services are required.
What's Included in the Box?
| Qty |
Component |
Product Code |
| 1 |
Paradox SP65 Alarm Controller, 9–32 Zones, 32 Users, 2 Areas, PCB Only |
PDX-SP65 |
| 1 |
Paradox Base Kit with Metal Enclosure, Battery, Plug Pack and Tamper Components |
PDX-KIT |
| 2 |
Paradox NV5 Digital Pet-Resistant PIR Motion Detectors with 3D Lens, Listed with Bracket |
PDX-NV5 |
| 1 |
X2 Combination Mini Siren/Strobe with Status LED and RX1 Holder |
X2-SIREN-001 |
| 1 |
12V DC Top-Hat Screamer |
CSD-1003 |
| 1 |
Paradox IP150+ Internet Communication Module |
PDX-IP150+ |
| 1 |
Paradox TM50 5" White Colour Touchscreen Keypad |
PDX-TM50W |
| 1 |
Paradox MG and SP User Manual |
PDX-MGSP-USER |
Paradox Base Kit Contents
The supplied base kit includes:
Important Inclusions and Exclusions
Included: IP150+ internet module, TM50W touchscreen, two wired NV5 detectors, X2 mini siren/strobe, 12V top-hat screamer, SP65 controller and base kit.
Not listed as included: Cellular communicator, wireless receiver, wireless PIR detectors, wireless remote controls, RX1 receiver, Ethernet network cable or remote-access service subscription.
The NV5 component description identifies mounting brackets, but Paradox's own documentation describes the SB100 wall/ceiling bracket as optional. The exact supplied bracket quantity should be confirmed.
Main Features and Benefits
1. Expandable Paradox SP65 Alarm Controller
The Paradox SP65 provides a versatile wired security platform with configurable expansion capabilities.
Key features:
-
Nine onboard hardwired security zones
-
Advanced Technology Zoning (ATZ) supporting up to 18 onboard zones
-
Expandable to a maximum of 32 security zones
-
Up to 32 user codes
-
Two independent security partitions
-
Three onboard programmable outputs
-
Programmable outputs expandable to 16
-
Four-wire expansion bus
-
Support for up to 15 compatible keypads
-
Optional wireless expansion through compatible RX1 or RTX3 modules
-
StayD and Sleep arming support
-
Compatible internet and cellular communication accessories
-
Menu-driven programming and supported firmware upgrades
Its expandable architecture allows installers to configure different alarm zones and add compatible equipment as security requirements evolve.
2. Premium TM50 5-Inch Colour Touchscreen
The included Paradox TM50W Touchscreen Keypad offers a modern, graphical interface for everyday security management.
Key features:
-
5-inch colour touchscreen display
-
480 × 272-pixel resolution
-
Intuitive icon-based navigation
-
White surface-mount design
-
Customisable labels for zones, partitions, users and programmable outputs
-
SpotOn Alarm Locator
-
OneScreen Monitoring
-
Support for controlling up to eight compatible PGMs
-
One configurable zone/temperature input
-
Optional external temperature sensor support
-
SD card functionality
-
Adjustable display brightness
-
Indoor temperature display
-
Support for compatible firmware updates
The touchscreen provides convenient access to alarm status, arming, disarming and other configured security functions.
3. SpotOn Alarm Locator
SpotOn Alarm Locator is an optional TM50 feature that allows configured security zones to be displayed graphically.
Paradox documents support for up to 32 uploaded floor plans.
When appropriately configured, the system can provide a visual reference for identifying detector and zone locations.
SpotOn requires installer setup and suitable floor-plan images.
4. OneScreen Monitoring
OneScreen Monitoring provides a convenient view of configured partition and zone security information.
It allows users to review alarm status through a central touchscreen display.
Compatible testing and monitoring functions depend on the system configuration.
5. Two NV5 Digital PIR Motion Detectors
The kit includes two Paradox NV5 Digital Motion Detectors, designed for indoor intrusion detection using advanced optical and digital processing technology.
Key features:
-
Full Authority Digital Electronics Control (FADEC)
-
Hybrid cylindrical-spherical 3D Lodiff Fresnel lens
-
10m × 10m detection coverage
-
90-degree viewing angle
-
Pet resistance up to 16kg
-
Five digital sensitivity levels
-
Digitally equalised detection pattern
-
Auto Pulse Signal Processing
-
Single-edge and dual-edge processing options
-
Automatic temperature compensation
-
Optional Super Creep down-looking detection
-
LED sensitivity adjustment feedback
-
Compatible SB100 wall/ceiling mounting bracket
The NV5's processing and adjustable detection settings allow installers to tailor motion detection to the protected environment.
6. Pet-Resistant Indoor Detection
The NV5 offers resistance to certain pet-related movement for animals weighing up to 16kg.
When correctly installed and configured, this can help reduce unwanted alarm activations in homes with smaller pets.
Pet resistance depends on mounting position, sensitivity, nearby furniture and animal behaviour.
Paradox advises that the optional Super Creep mirror should not be installed when pet-resistance operation is required.
7. IP150+ Internet Communication Included
The Paradox IP150+ provides Ethernet communication between the alarm controller and a suitable network.
Depending on firmware and configuration, supported functions may include:
-
Internet-based remote alarm access
-
Remote arming and disarming
-
Alarm status monitoring
-
Remote BabyWare programming
-
Supported central-station IP alarm reporting
-
Remote firmware and maintenance functions
-
Compatible Paradox app connectivity
The IP150+ is an Ethernet module, not a Wi-Fi or cellular communication device.
8. Insite Gold and BlueEye App Compatibility
The supplied product is marketed as an Insite Gold IP Kit.
Paradox's official IP150+ V5 installation manual documents Insite Gold operation, while the manufacturer's newer MQTT communication documentation identifies BlueEye as the supported app.
App compatibility is firmware-dependent. The supplied module firmware must be verified before promising Insite Gold access.
Different firmware families can also require different monitoring receivers, software versions and service arrangements.
9. Compatible Remote BabyWare Programming
With suitable firmware and network configuration, the IP150+ supports remote access using compatible Paradox BabyWare programming software.
This allows authorised security professionals to perform supported programming and maintenance functions.
Remote programming requires correctly configured permissions and network access.
10. X2 Mini Siren and Strobe
The included X2-SIREN-001 provides a combination audible and visual warning device.
The supplied component description identifies:
-
Audible siren
-
Visual strobe
-
Status indicator LED
-
PDX-RX1 mounting holder
The device requires an appropriate wired connection.
The RX1 holder does not mean an RX1 receiver or wireless siren functionality is included.
11. Additional 12V Top-Hat Screamer
The separate CSD-1003 12V DC Top-Hat Screamer provides an additional audible warning device.
It can be positioned and connected according to the property's alarm notification design.
12. Two Independent Security Areas
The SP65 supports two independently configured alarm partitions.
This allows different sections of a property to be managed separately, such as a home and office or a retail shopfront and storeroom.
13. Support for 32 User Codes
The controller supports up to 32 user codes.
This allows individual credentials to be configured for authorised household members, staff or other permitted users.
14. Backup Power Components
The Paradox base kit includes backup battery equipment to help maintain security controller operation during a mains power interruption.
Actual backup duration depends on battery condition, system loading and installed accessories.
Internet communication also depends on whether the connected router and network equipment remain powered.
15. Optional Wireless Expansion
The SP65 supports compatible wireless accessories through appropriate receiver or transceiver hardware.
This provides an upgrade path for properties where installing additional detector cabling may be difficult.
No wireless receiver or wireless sensor is included with this kit.
Detailed Technical Specifications
Paradox SP65 Alarm Controller
| Specification |
Details |
| Brand |
Paradox |
| Model |
SP65 |
| Product Code |
PDX-SP65 |
| Controller Type |
Expandable Wired Intrusion Alarm Controller |
| Onboard Wired Zones |
9 |
| Zones with ATZ Doubling |
18 |
| Maximum Expandable Zones |
32 |
| User Codes |
32 |
| Independent Partitions |
2 |
| Onboard PGMs |
3 |
| Maximum PGMs |
16 |
| Four-Wire Expansion Bus |
Yes |
| Supported Keypads |
Up to 15 Compatible Keypads |
| Wireless Expansion |
Optional RX1 / RTX3 |
| StayD Mode |
Supported |
| Sleep Arming |
Supported |
| Firmware Upgrades |
Via Compatible Paradox Software |
| Internet Connectivity |
Supported with IP150+ |
| Cellular Communication |
Optional Compatible Module |
| Included Touchscreen |
TM50W |
| Included Internet Module |
IP150+ |
| Installation Type |
Professional Security Installation |
Maximum zone and PGM capacity requires suitable expansion equipment.
Paradox NV5 Digital PIR Detectors
| Specification |
Details |
| Model |
NV5 |
| Product Code |
PDX-NV5 |
| Quantity Included |
2 |
| Detector Type |
Wired Digital Passive Infrared |
| Processing |
Full Authority Digital Electronics Control |
| Lens Technology |
3D Lodiff Fresnel, Hybrid Cylindrical-Spherical |
| Detection Coverage |
10m × 10m |
| Viewing Angle |
90° |
| Minimum Detection Distance |
0.5m |
| Pet Resistance |
Up to 16kg |
| Sensitivity Levels |
5 |
| Auto Pulse Signal Processing |
Supported |
| Automatic Temperature Compensation |
Supported |
| Single/Dual Edge Processing |
Supported |
| Optional Super Creep Zone |
Supported |
| Power Supply |
10–15V DC |
| Typical Current Consumption |
Approximately 10mA |
| Operating Temperature |
-10°C to +50°C |
| Dimensions |
Approximately 91 × 55 × 40mm |
| Optional Mounting Bracket |
SB100 |
| Manufacturer-Identified Certification |
CE and EN50131 Grade 2 |
| Installation Environment |
Indoor |
The detector's pet resistance is conditional and should not be interpreted as guaranteed immunity to every pet-related movement.
Paradox TM50W Touchscreen Keypad
| Specification |
Details |
| Model |
TM50 Touch |
| Product Code |
PDX-TM50W |
| Keypad Type |
Hardwired Colour Touchscreen |
| Colour |
White |
| Screen Size |
5 Inches |
| Resolution |
480 × 272 Pixels |
| Interface |
Icon-Based Touchscreen |
| SpotOn Alarm Locator |
Supported |
| OneScreen Monitoring |
Supported |
| Supported Floor Plans |
Up to 32 |
| Customisable Labels |
Yes |
| Compatible PGM Control |
Up to 8 |
| Configurable Zone/Temperature Input |
1 |
| Indoor Temperature Display |
Supported |
| SD Media Support |
Yes |
| Power Input |
9–15V DC |
| Display Current |
Approximately 150mA at Maximum Brightness |
| Additional Sounder Current |
Up to 80mA |
| Dimensions |
Approximately 142 × 95 × 14mm |
| Manufacturer-Identified Classification |
EN50131 Grade 3 |
| Installation |
Surface Mount |
Paradox IP150+ Internet Module
| Specification |
Details |
| Model |
IP150+ |
| Product Code |
PDX-IP150+ |
| Device Type |
Ethernet Internet Communication Module |
| Network Connection |
Wired Ethernet |
| Alarm Panel Connection |
Serial Interface |
| Compatible Controller |
SP65, Subject to Firmware |
| Insite Gold Support |
Documented for V5 Firmware Family |
| BlueEye Support |
Compatible Newer Firmware |
| Remote BabyWare Programming |
Supported with Compatible Firmware |
| IP Alarm Reporting |
Supported with Compatible Receivers |
| Remote Firmware Access |
Supported |
| SWAN Connectivity |
Firmware-Dependent |
| Wi-Fi |
Not Integrated |
| Cellular Connection |
Not Integrated |
| Router and Internet Service |
Required for Remote Access |
| Configuration |
Professional Setup Recommended |
Important: Paradox's newer MQTT documentation identifies BlueEye-only operation for the applicable firmware, rather than Insite Gold.
X2 Mini Combination Siren/Strobe
| Specification |
Details |
| Product Code |
X2-SIREN-001 |
| Device Type |
Combination Siren and Strobe |
| Audible Warning |
Included |
| Visual Strobe |
Included |
| Status LED |
Included |
| RX1 Mounting Holder |
Included |
| RX1 Receiver |
Not Listed as Included |
| Connection |
Wired |
| Quantity Included |
1 |
CSD-1003 Top-Hat Screamer
| Specification |
Details |
| Product Code |
CSD-1003 |
| Device Type |
Audible Alarm Screamer |
| Supply Voltage |
12V DC |
| Connection |
Wired |
| Quantity Included |
1 |
Paradox Base Kit
| Specification |
Details |
| Product Code |
PDX-KIT |
| Metal Enclosure |
Included |
| Backup Battery |
Included |
| Plug-Pack Power Supply |
Included |
| Cabinet Tamper Components |
Included |
Exact specifications for the distributor-assembled base kit, X2 siren/strobe and CSD-1003 screamer are not reproduced where an official Paradox-hosted attachment could not be verified.
Practical Applications and Use Scenarios
Residential Home Security
The Paradox SP65 IP Kit PK-GOLD-4 provides wired intrusion detection, touchscreen operation and compatible remote security management for homes and townhouses.
The two NV5 detectors can monitor selected indoor areas, while the X2 siren/strobe provides audible and visual warning.
Pet-Friendly Home Security
The NV5 detectors offer pet resistance for animals weighing up to 16kg when correctly installed.
This makes the kit suitable for consideration in homes with smaller pets.
Small Business and Office Security
With up to 32 users and two independent partitions, the SP65 offers flexible security management for smaller commercial premises.
The TM50 touchscreen provides straightforward alarm operation for authorised users.
Retail Store Security
The kit can be configured to monitor retail areas, stockrooms and other designated spaces.
Additional compatible sensors may be installed separately to extend coverage.
Holiday Home and Remote Property Monitoring
The IP150+ enables supported remote alarm access when connected to the internet and configured with a compatible Paradox application.
Application availability depends on firmware and service requirements.
Dual-Area Properties
Two independent partitions allow different areas, such as a residence and office, to be managed separately.
Existing Security System Upgrades
The SP65 provides an expandable wired alarm platform suitable for selected upgrades, subject to compatibility with existing equipment.
Future Security Expansion
Additional compatible sensors, keypads, wireless receivers and communication accessories can be incorporated as property requirements evolve.
Warranty Information
2 year warrenty
Australian Consumer Law guarantees and applicable New Zealand consumer protection rights remain in effect.
About Paradox
Paradox is a manufacturer of electronic intrusion security systems, including alarm controllers, digital motion detectors, touchscreen keypads and internet communication equipment.
Its Spectra SP product family provides configurable intrusion detection for residential and commercial security applications.
The SP65 controller, NV5 digital detectors, TM50 touchscreen and IP150+ communication module combine wired intrusion detection, intuitive alarm operation and network-enabled security management.
Product SKU / Code
| Field |
Details |
| Complete Kit SKU |
PK-GOLD-4 |
| Product Name |
Paradox SP65 Insite Gold IP Alarm Kit with TM50 |
| Controller Code |
PDX-SP65 |
| Base Kit Code |
PDX-KIT |
| Motion Detector Code |
PDX-NV5 |
| Siren/Strobe Code |
X2-SIREN-001 |
| Top-Hat Screamer Code |
CSD-1003 |
| Internet Module Code |
PDX-IP150+ |
| Touchscreen Code |
PDX-TM50W |
| User Manual Code |
PDX-MGSP-USER |
| Brand |
Paradox |
| Product Category |
IP Security Alarm Systems / Touchscreen Alarm Kits |
| Touchscreen Included |
Yes |
| Internet Module Included |
Yes |
| Cellular Communicator Included |
No |
Datasheets, Manuals and Downloadable Resources
Official Paradox Manufacturer Attachments Only
All links below lead to technical attachments hosted directly on the official Paradox website. No distributor product references or third-party datasheets are included.
Documentation Notes
SP65: The official Magellan & Spectra SP guides provide the controller's installation, wiring, programming and system operation information.
NV5: Paradox's NV5 documentation confirms 10m × 10m detection, 16kg pet resistance, digital processing and installation requirements.
TM50: The official brochure provides touchscreen specifications, compatible system information and features.
IP150+: The linked V5 manual documents Insite Gold connectivity and IP reporting. Newer MQTT firmware must be assessed separately for compatibility with BlueEye and monitoring equipment.
PDX-KIT: A dedicated official Paradox-hosted attachment for the complete distributor-assembled base kit has not been identified.
X2-SIREN-001: No official Paradox-hosted attachment has been verified for this warning device.
CSD-1003: No official Paradox-hosted attachment has been verified for the top-hat screamer.
These components remain included in the kit. Third-party datasheets are deliberately omitted.
Excellence for the Australian and New Zealand Market
The Paradox SP65 Insite Gold IP Alarm Kit PK-GOLD-4 provides an expandable intrusion security solution for professional residential and commercial installations throughout Australia and New Zealand.
Quality and Technical Standards
The kit combines Paradox intrusion alarm control, digital motion detection, touchscreen operation and Ethernet communication equipment.
Paradox's official NV5 technical documentation identifies CE and EN50131 Grade 2 approval for the detector.
The TM50 manufacturer's product information identifies EN50131 Grade 3 for the touchscreen.
These classifications relate to the respective components and do not automatically establish certification of the complete assembled kit under Australian or New Zealand standards.
Installation must comply with applicable local electrical, security and building requirements.
Suitable for Australian and New Zealand Properties
The SP65 supports flexible security configurations for houses, offices, retail shops and smaller commercial premises.
The inclusion of IP communication makes the kit relevant to properties requiring supported remote alarm management and network reporting.
Genuine Paradox Equipment and Authorised Sourcing
Globlelink customers should receive genuine Paradox equipment sourced through verified distribution channels.
Any claims of exclusive sourcing or authorised manufacturer representation should be supported by current supplier or manufacturer agreements.
Professional Installation and Configuration
Professional installation is recommended to ensure:
-
Correct SP65 controller installation
-
Appropriate NV5 detector placement and sensitivity configuration
-
Proper TM50 touchscreen setup
-
Compatible IP150+ firmware and application selection
-
Suitable Ethernet and internet connectivity
-
Appropriate IP reporting configuration
-
Correct X2 siren/strobe and top-hat screamer wiring
-
Proper cabinet tamper monitoring
-
Adequate backup power capacity
-
Compliance with applicable local installation requirements
-
Successful testing and commissioning
Manufacturer Warranty and Local Support
Warranty enquiries may be coordinated through the supplying business and the relevant manufacturer or authorised brand representative.
Warranty assessment and available remedies are subject to applicable manufacturer conditions and Australian or New Zealand consumer protection legislation.
Frequently Asked Questions (FAQs)
1. What is included in the Paradox SP65 Insite Gold IP Alarm Kit PK-GOLD-4?
The PK-GOLD-4 includes an SP65 controller, Paradox base kit, two NV5 digital PIR detectors, X2 mini siren/strobe, CSD-1003 top-hat screamer, IP150+ internet module, TM50W touchscreen and Paradox MG/SP user manual.
2. Does the Paradox SP65 Kit PK-GOLD-4 include a touchscreen keypad?
Yes. The PK-GOLD-4 includes a Paradox TM50W 5-inch colour touchscreen keypad.
3. Does the Paradox PK-GOLD-4 include an internet communication module?
Yes. The PK-GOLD-4 includes a Paradox IP150+ Ethernet internet module.
4. Can the Paradox SP65 Kit PK-GOLD-4 be controlled using Insite Gold?
The IP150+ supplied in PK-GOLD-4 supports Insite Gold with compatible V5 firmware. Newer MQTT firmware supports BlueEye instead. Confirm the actual installed firmware before selecting an app.
5. Does the Paradox PK-GOLD-4 support the BlueEye smartphone app?
Compatible IP150+ firmware may support BlueEye with PK-GOLD-4. The installer must verify the module version, account requirements and supported services.
6. How many zones does the Paradox SP65 Alarm Kit PK-GOLD-4 support?
The SP65 controller in PK-GOLD-4 provides nine onboard zones, supporting up to 32 security zones with compatible expansion.
7. Are the NV5 detectors in Paradox PK-GOLD-4 wired or wireless?
The two NV5 detectors included in PK-GOLD-4 are wired digital PIR motion detectors.
8. Is the Paradox SP65 Kit PK-GOLD-4 suitable for homes with pets?
The PK-GOLD-4 includes NV5 detectors offering pet resistance for animals weighing up to 16kg under suitable installation conditions.
9. What is the detection range of the NV5 detectors in PK-GOLD-4?
Each NV5 detector included in PK-GOLD-4 provides 10m × 10m detection coverage with a standard 90-degree viewing angle.
10. What is FADEC technology in the Paradox PK-GOLD-4?
The NV5 detectors in PK-GOLD-4 use Full Authority Digital Electronics Control to process PIR detection signals and support configurable intrusion detection.
11. Does the Paradox PK-GOLD-4 include a siren and strobe?
Yes. The PK-GOLD-4 includes an X2 combination mini siren/strobe together with a separate 12V DC top-hat screamer.
12. Is the siren/strobe included in Paradox PK-GOLD-4 wireless?
No. The X2 siren/strobe supplied with PK-GOLD-4 is a wired device. The RX1 mounting holder does not mean a wireless receiver is included.
13. Does the Paradox SP65 Kit PK-GOLD-4 include backup battery components?
Yes. The PK-GOLD-4 includes backup battery equipment as part of the Paradox base kit. The exact battery capacity should be confirmed against the supplied package.
14. Can the Paradox PK-GOLD-4 report alarms to a monitoring station?
The IP150+ in PK-GOLD-4 supports compatible IP alarm reporting configurations. Receiver compatibility depends on firmware and monitoring-station requirements. Monitoring service is not included.
15. Can the Paradox SP65 Kit PK-GOLD-4 be programmed remotely?
The IP150+ module supplied with PK-GOLD-4 supports compatible remote BabyWare programming when configured appropriately for authorised installer access.
16. Does the Paradox PK-GOLD-4 connect to Wi-Fi?
The included IP150+ in PK-GOLD-4 uses Ethernet rather than integrated Wi-Fi. An appropriate network connection is required.
17. What is SpotOn Alarm Locator on the TM50 in PK-GOLD-4?
SpotOn Alarm Locator in PK-GOLD-4 allows configured zone locations to be displayed on uploaded floor plans through the TM50 touchscreen.
18. What is OneScreen Monitoring in the Paradox PK-GOLD-4?
OneScreen Monitoring on the TM50 included in PK-GOLD-4 provides an overview of configured partitions and zone conditions through the touchscreen interface.
19. Can the Paradox SP65 Kit PK-GOLD-4 secure two independent areas?
Yes. The PK-GOLD-4 supports two independently configured security partitions.
20. How many users can operate the Paradox PK-GOLD-4 alarm system?
The SP65 controller included in PK-GOLD-4 supports up to 32 user codes.
21. Can wireless detectors be added to the Paradox SP65 Kit PK-GOLD-4?
Yes. The SP65 in PK-GOLD-4 supports compatible wireless expansion through suitable separately purchased receiver or transceiver modules.
22. Does the Paradox PK-GOLD-4 include a cellular communicator?
No. The PK-GOLD-4 includes an Ethernet IP150+ internet module but no cellular communicator.
23. Can the Paradox SP65 Kit PK-GOLD-4 operate without internet access?
The core local alarm functions in PK-GOLD-4 can operate without internet access when correctly installed and configured. Internet-dependent remote access and IP reporting require connectivity.
24. Is the Paradox SP65 Alarm Kit PK-GOLD-4 suitable for small businesses?
The PK-GOLD-4 can be configured for offices, retail shops and smaller commercial properties, subject to site security requirements and applicable installation standards.
25. Does the Paradox PK-GOLD-4 require professional installation?
Professional installation is recommended for PK-GOLD-4 to ensure correct detector placement, controller programming, siren wiring, touchscreen configuration, IP connectivity and system testing.
26. Where can I find official Paradox datasheets for PK-GOLD-4?
The PK-GOLD-4 listing includes official Paradox-hosted technical documents for the SP65 controller, NV5 detectors, TM50 touchscreen and IP150+ module.
27. Are all components in Paradox PK-GOLD-4 documented by official Paradox attachments?
No. The PK-GOLD-4 includes X2 and CSD warning devices, as well as a distributor-assembled base kit, for which separate official Paradox-hosted attachments have not been verified.
28. What warranty applies to the Paradox SP65 Insite Gold IP Kit PK-GOLD-4?
Warranty coverage for PK-GOLD-4 depends on the applicable manufacturer and supplier terms for its components. Confirm the warranty duration and claims process with the supplier.
29. Is the Paradox PK-GOLD-4 compatible with both Insite Gold and BlueEye simultaneously?
The PK-GOLD-4 cannot be assumed to support both apps simultaneously. Application compatibility depends on the IP150+ firmware family, and the installer should verify the intended configuration.
30. What is the product code for the Paradox SP65 Insite Gold Kit with TM50 and NV5 Detectors?
The complete Paradox SP65 IP alarm kit with TM50W touchscreen, two NV5 wired digital motion detectors, IP150+ module and mini siren/strobe is identified by SKU PK-GOLD-4.