The TAKEX PVW-12TE Indoor/Outdoor PIR Motion Detector with Voice Message Playback combines reliable passive infrared movement detection with a built-in 80dB speaker for automatic voice warnings and announcements. Featuring a 12m detection range, 90° coverage, two selectable recorded messages, a built-in microphone, external audio input and 10–30V DC operation, the PVW-12TE is ideal for commercial security, outdoor intrusion warnings, visitor announcements and automated voice notification systems across Australia and New Zealand.

Designed to provide both movement detection and audible communication in a single device, the TAKEX PVW-12TE automatically plays a recorded message when motion is detected within its coverage area. The unit supports two independently recorded messages of up to eight seconds each, allowing different announcements to be selected according to ambient daylight or an external arm/disarm control signal.

The advanced dual-zone PIR detection system uses horizontal and downward detection zones with AND detection logic. An activation occurs only when both zones detect movement, helping minimise nuisance alarms caused by small animals or environmental disturbances.

For installation flexibility, the PVW-12TE features an adjustable 3–12m detection distance, horizontally adjustable sensor head, selectable pulse count and adjustable PIR sensitivity. Its rainproof construction supports suitable indoor and outdoor installations.

The integrated microphone and external line input make custom message recording straightforward, while the adjustable volume, selectable message replay functions and alarm relay output enable integration with compatible security systems, access control equipment and announcement applications.

Whether used to welcome visitors, warn trespassers, announce restricted areas or provide automated instructions, the TAKEX PVW-12TE offers a practical combination of PIR detection and voice communication.

Main Features

1. Integrated PIR Motion Detection and Voice Speaker

Combines passive infrared motion sensing with a built-in speaker, automatically playing a recorded message when qualifying movement is detected.

2. Up to 12m Detection Range

Provides a maximum 12m PIR detection distance with a 90° coverage angle, making it suitable for monitoring entrances, pathways, doorways and selected outdoor areas.

3. Dual-Zone AND Detection Technology

Uses seven horizontal and seven downward detection zones. Both detection areas must activate to trigger an alarm, helping reduce unwanted activations.

4. Two Independently Recordable Voice Messages

Stores two custom voice messages, each up to eight seconds long, for different warnings, announcements or operational conditions.

5. Automatic Day/Night Message Selection

Allows one message to be played during daytime and another at night, based on the built-in daylight sensor and configured switching threshold.

6. External Arm/Disarm Message Control

Supports message selection through an external input, allowing different announcements depending on the state of a compatible security or control system.

7. Built-In Microphone and External Audio Input

Record messages directly using the integrated microphone or through the audio input jack connected to compatible external recording equipment.

8. Adjustable Voice Volume up to 80dB

Features an integrated speaker with adjustable output volume up to 80dB for audible warnings and announcements.

9. Adjustable Message Replay Duration

The sound replay period can be configured from approximately two seconds to five minutes, allowing messages to repeat during the selected operating period.

10. External Message Replay Trigger

A dedicated trigger input allows messages to be activated by compatible external sensors, switches or control equipment.

11. Alarm Relay Output

Includes a selectable normally open or normally closed dry contact output for connection to compatible alarm panels and monitoring systems.

12. Adjustable Detection Distance and Direction

Detection distance is adjustable between 3m and 12m, with horizontal aiming adjustment of ±90° to suit different installation layouts.

13. Adjustable PIR Sensitivity and Pulse Count

Provides sensitivity adjustment from approximately 30% to 170% and selectable pulse count settings of one or three for improved installation flexibility.

14. Rainproof Indoor and Outdoor Design

Suitable for installation in appropriate indoor or outdoor locations, with operating temperatures from -20°C to +50°C.

15. Non-Polarity DC Power Input

Operates from a 10–30V DC power supply, with standby current consumption of up to 55mA.

Detailed Technical Specifications

What's Included in the Box?

• 1 × TAKEX PVW-12TE PIR Motion Detector with Integrated Voice Speaker.

The manufacturer's standard package may include installation documentation and mounting hardware. Exact included accessories and quantities should be confirmed with the supplier before purchase.

Please note: The optional BW-24 wall mounting attachment and BP-22 pole mounting attachment may be purchased separately.

Practical Use Scenarios

Commercial Entrance Announcements

Automatically welcome customers or visitors as they approach retail stores, offices, reception areas or commercial entrances. Two recorded messages allow announcements to change between daytime and nighttime operation.

Outdoor Intruder Warning Systems

Play a customised security warning when movement is detected around commercial premises, restricted pathways or monitored outdoor areas.

Warehouse and Industrial Safety Notifications

Deliver recorded warnings near designated industrial access points, storage areas or operational zones where additional audible notification is beneficial. The unit should not be relied upon as a certified safety-warning device without appropriate assessment.

Automatic Visitor Greeting Systems

Use the PIR detector to trigger voice greetings at entrances, visitor centres, exhibitions and customer service locations.

Restricted Area Warnings

Provide automatic instructions such as restricted-entry notices, access directions or site-specific security warnings when a person enters the monitored detection area.

Security Alarm Integration

Use the dry contact relay output to communicate movement events to compatible alarm panels or monitoring equipment.

Day and Night Security Announcements

Configure separate voice messages for business hours and after-hours security monitoring, using the built-in daylight control or external arm/disarm input.

Installation and Configuration Guidelines

The TAKEX PVW-12TE is suitable for indoor or outdoor mounting, with a recommended installation height of approximately 0.8–1.2m.

For reliable performance:

• Mount the detector vertically at the manufacturer's recommended height.

• Position the sensor to cover the required approach path or entrance.

• Adjust the detection range between 3m and 12m according to the installation.

• Use horizontal rotation and fine adjustment to optimise the sensing area.

• Configure PIR sensitivity and pulse count settings to suit environmental conditions.

• Record two custom messages through the built-in microphone or external audio input.

• Select daylight-based or external arm/disarm message control.

• Adjust the volume to suit the premises and surrounding environment.

• Configure the replay period and external trigger input if required.

• Provide a power supply capable of supporting up to 300mA during maximum-volume playback.

• Perform walk testing and confirm correct message activation before commissioning.

Avoid installations directly facing heating outlets, moving vegetation or objects subject to rapid temperature changes.

For outdoor applications, the PVW-12TE is intended as a notification and warning device rather than a standalone high-security perimeter detection system.

Warranty Information

The TAKEX PVW-12TE installation documentation specifies a limited manufacturer's warranty of 12 months from the original shipment date, subject to the manufacturer's applicable conditions.

For warranty enquiries or technical support, contact the supplying distributor or authorised TAKEX representative.

Australian and New Zealand consumer rights may apply in addition to the manufacturer's warranty terms.

About TAKEX

TAKEX, associated with Takenaka Engineering in Japan, specialises in electronic security and sensor-based detection solutions for residential, commercial and industrial applications.

Its product range includes passive infrared motion detectors, photoelectric beam sensors, microwave detectors, sensor speakers, outdoor security equipment and specialist intrusion detection solutions.

TAKEX sensor speakers integrate movement detection with automatic voice announcements, offering flexible options for entrance monitoring, security notifications and commercial applications.

SKU and Product Information

SKU: PVW-12TE

Manufacturer: TAKEX

Manufacturer Part Number: PVW-12TE

Product Category: PIR Security Detectors / Voice Announcement Sensors

Product Price: $270.23 AUD Excluding GST

Price Including 10% GST: $297.25 AUD

Datasheets and Downloadable Resources

• TAKEX PVW-12TE Manufacturer Datasheet

• TAKEX PVW-12TE Installation and Operating Instructions

• TAKEX PVW-12TE Detection Coverage Diagrams

• TAKEX PVW-12TE Voice Recording and Playback Configuration Guide

• TAKEX PVW-12TE Wiring and Output Specifications

Official product information and technical documents are available through TAKEX manufacturer resources.

Excellence for the Australian and New Zealand Market

Versatile Security and Voice Notification for Australia and New Zealand

The TAKEX PVW-12TE provides a practical combination of passive infrared movement detection and automatic voice playback for security and commercial notification applications throughout Australia and New Zealand.

Its rainproof construction, adjustable detection coverage and customisable messages make it suitable for a variety of indoor and outdoor installation environments.

Professional Quality and Installation Standards

TAKEX develops specialist electronic security and sensing technologies for professional applications. Installers should ensure that installations comply with all applicable Australian and New Zealand electrical and security requirements.

Specific Australian regulatory certifications or approvals should be confirmed with the manufacturer or supplying distributor before procurement where required.

Authorised Brand Supply

Purchasing through authorised TAKEX representatives helps ensure product authenticity, suitable technical support and access to genuine accessories.

Manufacturer Warranty Assistance

Warranty and technical support enquiries can be managed through authorised supply channels and referred to TAKEX in accordance with applicable manufacturer warranty arrangements.

Adaptable to Local Commercial Applications

With its configurable PIR coverage, two recordable messages, adjustable 80dB speaker and 10–30V DC operation, the PVW-12TE supports integration into compatible security and notification systems used in retail, commercial, industrial and residential applications throughout Australia and New Zealand.