The DIGIFLEX RF113W SMART RF Wireless Reed Switch is a high-performance 433MHz wireless magnetic door and window contact with external input, designed for compatible Bosch Solution 6000 intrusion alarm systems. Featuring a built-in magnetic reed switch, programmable external zone input, tamper protection, white surface mount housing and up to 5 years of battery life, the RF113W provides flexible and reliable security monitoring when paired with DIGIFLEX RF120 or RF121 wireless receivers and Bosch Solution 6000 control panels running firmware V2.53.18 or later.
Developed by DIGIFLEX for professional security installations, the RF113W combines magnetic door and window monitoring with additional wired input functionality. Its external input supports dry contact, single end-of-line (EOL), alarm and tamper monitoring, and pulse counting applications, allowing installers to connect compatible external devices.
Powered by a single 3V CR123A lithium battery, the RF113W offers up to five years of battery operation under suitable conditions, reducing routine maintenance requirements.
Main Features
-
433.42MHz Wireless Communication: Designed for DIGIFLEX SMART RF wireless security installations.
-
Bosch Solution 6000 Compatible: Suitable for supported Solution 6000 alarm panels running firmware V2.53.18 or later.
-
RF120 and RF121 Receiver Support: Compatible with DIGIFLEX SMART RF120 and RF121 wireless receivers.
-
Integrated Magnetic Reed Switch: Detects door and window opening through magnet separation.
-
External Wired Zone Input: Supports additional compatible wired contacts and monitoring devices.
-
Multiple External Input Modes: Supports single EOL, alarm and tamper EOL, dry contact and pulse counting configurations.
-
Up to 5-Year Battery Life: Uses a replaceable 3V CR123A lithium battery.
-
Tamper Protection: Includes enclosure and mounting tamper provisions to support supervised security installations.
-
Flexible Magnet Placement: Supports high and low magnet positioning with installation tolerances dependent on the mounting surface.
-
Surface Mount Design: Suitable for compatible timber, metal and other interior mounting surfaces.
-
White Housing: Blends with white doors, window frames and light-coloured architectural finishes.
-
LED Status Indicator: Provides visual feedback for power-up, configuration, communication and input activation.
-
Adhesive or Screw Mounting: Supplied with mounting screws and double-sided adhesive tape.
-
Australian and New Zealand RCM Approval: Identified in the manufacturer's documentation as RCM approved for Australia and New Zealand.
Technical Specifications
| Specification |
Details |
| Brand |
DIGIFLEX |
| Product Series |
SMART RF |
| Product Code / SKU |
RF113W |
| Product Type |
Wireless Magnetic Reed Switch with External Input |
| Colour |
White |
| Mounting Type |
Surface Mount |
| Detection Type |
Magnetic Reed Contact |
| Wireless Frequency |
433.42MHz |
| RF Modulation |
FSK |
| Data Rate |
25kbps |
| Data Encoding |
Manchester |
| External Input |
Yes |
| Supported Input Types |
Single EOL, Alarm + Tamper EOL, Dry Contact, Pulse Counting |
| External Wiring Distance |
Maximum 8m |
| Auxiliary Output |
3VDC |
| Power Supply |
3VDC Battery |
| Battery Type |
CR123A Lithium |
| Battery Life |
Up to 5 Years |
| Compatible Battery Models |
Panasonic CR123A, Duracell DL123A |
| Tamper Protection |
Enclosure / Rear Case Tamper |
| Operating Temperature |
-10°C to +49°C |
| EN 50130-5 Class II Temperature Range |
-10°C to +40°C |
| Relative Humidity |
0–93%, Non-Condensing |
| Installation Environment |
Indoor |
| Compatible Receivers |
DIGIFLEX RF120, RF121 |
| Compatible Alarm Panel |
Bosch Solution 6000 |
| Minimum Panel Firmware |
V2.53.18 |
| Certifications |
RCM (Australia/New Zealand), CE (Europe) |
| Warranty |
Subject to Manufacturer / Supplier Terms |
Physical Dimensions
| Component |
Dimensions |
| Transmitter Housing |
102 x 29.6 x 17.4mm |
| Magnet Housing |
54 x 22.5 x 13.5mm |
Dimensions are based on the manufacturer's installation guide diagrams.
Bosch Solution 6000 Compatibility
The DIGIFLEX RF113W is designed for compatible Bosch Solution 6000 alarm installations using the DIGIFLEX SMART RF receiver range.
| Device / System |
Compatibility |
| Bosch Solution 6000 |
Compatible with supported firmware |
| DIGIFLEX RF120 |
Compatible |
| DIGIFLEX RF121 |
Compatible |
| Minimum Panel Firmware |
V2.53.18 |
| Operating Frequency |
433.42MHz |
Important Firmware Requirement
The Bosch Solution 6000 alarm control panel must be running firmware V2.53.18 or later to support the RF113 SMART RF wireless contact.
Bosch firmware V2.53.18 introduced support for the DIGIFLEX RF112 and RF113 SMART RF reed switches.
Before installing or upgrading firmware, verify the alarm panel hardware revision, serial number and supported firmware version. Bosch specifies particular upgrade restrictions for older Solution 6000 control panels.
External Input Capabilities
One of the main advantages of the DIGIFLEX RF113W is its integrated external wired input.
The input allows compatible wired security devices to be connected to the wireless transmitter, extending the range of potential applications.
Supported External Input Configurations
-
Single EOL: Allows supervised external input wiring using a single end-of-line resistor configuration.
-
Alarm + Tamper EOL: Supports alarm and tamper monitoring through a compatible dual-function EOL configuration.
-
Dry Contact: Allows connection of compatible contact-based external devices.
-
Pulse Counting: Supports compatible pulse or clicker input applications.
The external connection terminals are identified as Input, GND and +3V.
External Wiring Distance: Maximum 8 metres.
Auxiliary 3VDC Output: An output is available for compatible external devices. Powering additional equipment from this output will reduce the RF113W battery life.
EOL resistor values and input configuration must follow the selected Bosch control panel programming requirements.
What's Included in the Box?
-
1 x DIGIFLEX RF113W SMART RF Printed Wiring Assembly
-
1 x White Transmitter Housing with Cover and Mounting Plate
-
1 x Double-Sided Adhesive Tape for Transmitter
-
1 x Magnet Housing with Cover and Mounting Plate
Practical Applications
1. Residential Security Alarm Systems
The DIGIFLEX RF113W provides wireless magnetic door and window monitoring for compatible Bosch Solution 6000 residential intrusion alarm systems.
2. Commercial Door and Window Protection
Suitable for offices, retail premises, commercial buildings and other protected spaces requiring wireless perimeter monitoring.
3. Wireless Integration of External Contacts
The RF113W external input allows compatible wired reed switches or contact-based devices to be connected to a SMART RF wireless security system.
4. Garage Door Monitoring
Can be used with appropriately configured external door contacts for monitoring compatible garage doors and other larger openings.
5. Retrofit Security Installations
Its wireless design helps extend existing compatible Bosch security systems without installing a wired connection between the door contact and the alarm panel.
6. Window Security Monitoring
The surface mount detector and neodymium magnet can be positioned on suitable window frames to monitor opening events.
7. Pulse Counting Applications
The external input supports pulse counting configurations for compatible devices where this function is required.
8. Multi-Surface Installations
The mounting design can accommodate suitable metal or timber frames, provided the appropriate magnet positioning and wireless signal performance are verified.
Magnet Installation and Operating Gaps
The DIGIFLEX RF113W supports different magnet mounting positions. The operating distances depend on the mounting surface and magnet placement.
Side Reed Switch – Alarm to Normally Closed
| Magnet Position |
Metal Surface |
Timber Surface |
| High Position – X Distance |
15mm |
22mm |
| Low Position – X Distance |
7mm |
20mm |
Side Reed Switch – Normally Closed to Alarm
| Magnet Position |
Metal Surface |
Timber Surface |
| High Position – X Distance |
16mm |
23mm |
| Low Position – X Distance |
8mm |
22mm |
These distances are based on the RF113 manufacturer placement guide. Additional Y and Z positioning requirements apply. The device must be installed and tested according to the manufacturer's alignment diagrams.
For best results, install the magnet as close as practical to the transmitter and align its centre with the magnet alignment mark on the RF113W housing.
Installation Considerations
For reliable operation, the DIGIFLEX RF113W should be installed according to the manufacturer's reference guide.
-
Mount the transmitter and magnet on suitable indoor door or window surfaces.
-
Align the magnet with the marked reed switch sensing position.
-
Select the correct high or low magnet installation configuration.
-
Confirm the mounting gap for timber or metal surfaces.
-
Verify wireless communication with the RF120 or RF121 receiver.
-
Configure the device using the supported Bosch Solution 6000 control panel functions.
-
Keep external input wiring within the maximum 8m distance.
-
Protect the transmitter from rain, snow, excess moisture and unsuitable temperatures.
-
Use compatible CR123A lithium batteries when replacement is required.
-
Test alarm, tamper and external input functions before commissioning.
Adhesive Mounting Guidelines
The RF113W includes double-sided adhesive tape for suitable installations.
For proper adhesion:
-
Avoid rough or uneven mounting surfaces.
-
Clean the surfaces using isopropyl alcohol wipes.
-
Confirm correct detector positioning and zone operation before removing the adhesive backing.
-
Apply firm pressure to the device for approximately 30 seconds after positioning.
Screw mounting should be used where appropriate for the installation environment.
LED Status Indicators
The RF113W incorporates an LED indicator for installation and diagnostics.
| LED Indication |
Function |
| 6 Slow Flashes |
Device Powered Up |
| 4 Fast Flashes |
Device Configured |
| Continuous Flashing |
Device Transmitting or Receiving |
| Single Pulse |
Device Input Triggered |
When the alarm panel is in service mode and the detector tamper is activated, the LED can remain available for diagnostic assistance for up to 15 minutes.
During normal operation, the LED remains off to help conserve battery life.
Warranty Information
The DIGIFLEX RF113W SMART RF Wireless Reed Switch is covered by a 1-year manufacturer and supplier warranty conditions.
About DIGIFLEX
DIGIFLEX is an Australian security electronics brand providing wireless security components and solutions for professional intrusion alarm installations.
The DIGIFLEX SMART RF range includes wireless contacts, receivers and accessories designed to integrate with compatible Bosch Solution 6000 alarm systems.
Its products support flexible system expansion and professional installation requirements across residential and commercial security applications.
Excellence for the Australian and New Zealand Market
The DIGIFLEX RF113W SMART RF Wireless Reed Switch is designed to meet the practical requirements of professional security installers and system integrators across Australia and New Zealand.
-
Australian Security Technology: Developed by DIGIFLEX, an Australian security electronics supplier.
-
Australian and New Zealand RCM Approval: The manufacturer identifies RCM approval for the RF113 SMART RF wireless contact.
-
Bosch Solution 6000 Integration: Compatible with supported Bosch Solution 6000 alarm panels running firmware V2.53.18 or later.
-
Professional Installation Flexibility: Combines an integrated magnetic reed switch with external input capabilities for different security monitoring applications.
-
433MHz SMART RF Communication: Designed for operation with compatible DIGIFLEX RF120 and RF121 wireless receivers.
-
Residential and Commercial Applications: Suitable for compatible security installations in homes, offices, retail premises and commercial facilities.
-
Authentic Product Sourcing: Purchasing through authorised DIGIFLEX representatives and distributors is recommended to support genuine product supply.
-
Warranty Support: Warranty enquiries can be coordinated through authorised supply channels and directly with relevant brand representatives, subject to applicable warranty conditions.
Frequently Asked Questions (FAQs)
1. What is the DIGIFLEX RF113W SMART RF Wireless Reed Switch used for?
The DIGIFLEX RF113W is a wireless magnetic door and window contact designed for compatible Bosch Solution 6000 security alarm systems. It detects opening events and supports an external wired input for additional monitoring applications.
2. Is the DIGIFLEX RF113W compatible with Bosch Solution 6000 alarm systems?
Yes. The DIGIFLEX RF113W is compatible with supported Bosch Solution 6000 alarm panels operating with DIGIFLEX RF120 or RF121 receivers and the required panel firmware.
3. What firmware version is required for the DIGIFLEX RF113W?
The DIGIFLEX RF113W requires Bosch Solution 6000 control panel firmware V2.53.18 or later. Installers should verify firmware and hardware compatibility before installation or upgrading.
4. Which wireless receivers are compatible with the DIGIFLEX RF113W?
The DIGIFLEX RF113W is designed for compatible DIGIFLEX RF120 and RF121 SMART RF wireless receivers used with supported Bosch Solution 6000 alarm systems.
5. What wireless frequency does the DIGIFLEX RF113W use?
The DIGIFLEX RF113W operates at 433.42MHz and uses FSK modulation with Manchester data encoding.
6. Does the DIGIFLEX RF113W have an external input?
Yes. The DIGIFLEX RF113W features an external wired input supporting dry contact, single EOL, alarm and tamper EOL, and pulse counting configurations.
7. What is the maximum external input wiring distance for the DIGIFLEX RF113W?
The DIGIFLEX RF113W supports a maximum external input wiring distance of 8 metres, as specified in the manufacturer's installation guide.
8. What battery does the DIGIFLEX RF113W use?
The DIGIFLEX RF113W uses a 3V CR123A lithium battery. The manufacturer's documentation identifies Panasonic CR123A and Duracell DL123A batteries.
9. How long does the DIGIFLEX RF113W battery last?
The DIGIFLEX RF113W provides up to five years of battery operation under suitable conditions. Actual battery life depends on usage, environmental conditions and connected external devices.
10. Can the DIGIFLEX RF113W power external devices?
Yes. The DIGIFLEX RF113W includes a 3VDC output for compatible external devices. Powering additional devices will reduce battery life, and the load must remain within manufacturer-specified limits.
11. Does the DIGIFLEX RF113W include tamper protection?
Yes. The DIGIFLEX RF113W includes enclosure and rear-case tamper provisions to help detect interference with the device.
12. Can the DIGIFLEX RF113W be installed on metal door frames?
Yes, where installation conditions permit. The DIGIFLEX RF113W installation guide provides magnet placement distances for metal and timber surfaces. Installers should also verify reliable wireless communication.
13. What is the magnetic operating gap of the DIGIFLEX RF113W?
The DIGIFLEX RF113W operating gap varies depending on magnet positioning and mounting surface. The manufacturer's guide specifies alarm activation distances ranging from 8mm to 23mm in the listed side-reed configurations.
14. Is the DIGIFLEX RF113W suitable for residential security systems?
Yes. The DIGIFLEX RF113W is suitable for compatible Bosch Solution 6000 residential alarm installations requiring wireless door and window monitoring.
15. Can the DIGIFLEX RF113W be used in commercial security installations?
Yes. The DIGIFLEX RF113W can be integrated into compatible commercial intrusion alarm systems for monitoring doors, windows and other protected openings.
16. Is the DIGIFLEX RF113W waterproof?
The DIGIFLEX RF113W is intended for protected indoor installation. The manufacturer recommends protecting the device from rain, snow, excessive humidity and unsuitable environmental conditions.
17. Does the DIGIFLEX RF113W come with mounting accessories?
Yes. The DIGIFLEX RF113W includes mounting screws, a case locking screw, transmitter and magnet housings, double-sided adhesive tape and a neodymium magnet.
18. Does the DIGIFLEX RF113W support pulse counting?
Yes. The DIGIFLEX RF113W external input supports pulse counting configurations for compatible connected devices and correctly configured alarm systems.
19. Does the DIGIFLEX RF113W have Australian and New Zealand certification?
Yes. The DIGIFLEX RF113W installation documentation identifies RCM approval for Australia and New Zealand, as well as CE approval for Europe.
20. Why choose the DIGIFLEX RF113W wireless reed switch for Bosch Solution 6000?
The DIGIFLEX RF113W combines 433.42MHz wireless communication, integrated magnetic contact detection, versatile external input options, tamper supervision and up to five years of battery life. Its compatibility with RF120 and RF121 receivers makes it a flexible solution for supported Bosch Solution 6000 security installations.
